OHAUS Scout pro - Symbols Used for Operation of the Balance; Turning the Balance on; Turning the Balance off

SCOUT PRO EN-9
Symbols Used for Operation of the Balance
Symbols are used to simplify the setup and operation of the balance. A description of
each symbol follows:
1
3
5
PRINT
Unit
• • •
Press
The clock symbols adjacent to the finger symbol indicates the
length of time to press a button.
ON/ZERO
Off
Panel control buttons used to intiate actions.
Displays are shown as they actually appear on
the balance. A model with 200g capacity was
used for the displays shown in this manual.
Indicates scrolling to a final display. The first and last displays are shown.
ON/ZERO
Off
1
Indicates advances to next display.
• • •
Turning the Balance On
Turning the Balance Off
ON/ZERO
Off
3
1 second momentary press.
3 second extended press.
5 second extended press.