PRINT
Unit
(Remove weight)
1
(Example 10g)
(Place 2nd weight on platform)
(Remove weight) (Place 3rd weight on platform)
PRINT
Unit
1
(Total weight shown)
PRINT
Unit
1
(Total weight shown)
(Remove weight)
Totalize
Totalize is
enabled only
when Total is turned ON in the Mode submenu in the .S.E.T.U.P.
menu. Totalize allows storage of a series of weight measurements. Totalize mode has
been initiated when “t” and the current unit, i.e. (g) is displayed. When totalized
weight is shown, the “t” indicator will blink. NOTE: Units cannot be changed when
in Display-Hold mode.
PRINT
Unit
1
Total weight will remain on the display until weight is removed. The total weight remains
in memory. Total is limited to 999999.
3
ON/ZERO
Off
To Next Page
