To Next Page
D
Debbie QuinnSep 13, 2025
What causes OHAUS Scales to exceed off center limit?
- AAlexis BarrettSep 13, 2025
If your OHAUS Scales exceed the off-center limit, it is likely due to a defective transducer. Consider replacing the transducer.
What causes OHAUS Scales to exceed off center limit?
If your OHAUS Scales exceed the off-center limit, it is likely due to a defective transducer. Consider replacing the transducer.
General| Model | SCOUT |
|---|---|
| Calibration | External Calibration |
| Type | Portable Balance |
| Pan Size | Varies by model (e.g., 93 mm, 120 mm, 145 mm, 170 mm x 140 mm) |
| Display | LCD |
| Power | AC adapter or 4 AA batteries |
| Units of Measurement | Gram, Kilogram, Pound, Ounce, Troy Ounce, Carat, Grain |
| Interface | RS232 |
| Platform Size | Varies by model |
| Operating Temperature | 10°C to 40°C |
| Humidity | 10% - 85% relative humidity, non-condensing |
| Readability | 0.01g to 1g depending on model |
Overview of the Ethernet Interface Kit's compatibility with Ohaus Scout series products.
Instructions for physically connecting the Ethernet interface module to the balance.
Configuring Ethernet and printing parameters on the balance after installation.
Explanation of various menu settings for printing and Ethernet communication.
Details the preset IP address and port number for the Ethernet interface.
Describes how the balance operates with the Ethernet interface installed.
Defines the structure of default print output strings for non-check weighing applications.
Defines print output strings specifically for check weighing applications.
Specifies print output strings for specific Scout Pro models.
Specifies print output strings for specific Scout Pro models.
Defines print output strings for certain Point of Sale (POS) systems.
Lists case-sensitive interface commands and their corresponding functions for balance control.
Step-by-step guide for setting Ethernet parameters via a web interface.
Information on obtaining Ohaus printers and other accessories.
Details FCC compliance and measures to mitigate radio frequency interference.
Guidance on proper disposal of the device according to WEEE regulations.
