Ohmeda Biox 3700 - Page 88

1118-301
COMPUTER INTERFACE
PROGRAMMING
Programming the IBM PC to Communicate with the Ohmeda Biox 3700 Oximeter
3. Type BASICA after the prompt. The computer screen should look
like the following:
A>BASICA
If the computer screen does not display capital letters, then
press the CAPS LOCK key.
4. Press ENTER Jj II
5. The BASIC Language Sign-On Message should appear on the computer
screen. For example, the message may look like the following:
IBM Personal Computer Basic
Version D3.10 Copyright IBM Corp 1981, 1985
61310 bytes free
6. On the next page is an example program which may be run on the IBM
PC to communicate with the Ohmeda Biox 3700 Oximeter. Before
typing the program, here are some Helpful Hints to review.
Editing Hints
To Correct a MINOR typing mistake:
* Use the BACKSPACE Key to back up to the mistake
* Type the correct character
* Press the ENTER key after the correction has been made
To Correct a MAJOR typing mistake:
* Press the ESCAPE key
A Backslash appears and the cursor should move down one line
on the computer screen
The line with the mistake has been cancelled
Retype the line
Press the ENTER key after the line has been entered
05/09/86
76a