Why does an oblong area of faint print appear on each page from my Oki B4200?
An oblong area of faint print appearing on each page from your Oki Printer is often caused by using paper exposed to high humidity. Change paper stocks, check the paper storage environment, or use a dehumidifier. Also, check the toner level.
Why is my Oki Printer's output below rated speed?
If your Oki Printer’s output is below the rated speed, it's often due to your application. Sometimes purely text documents will print slowly depending on the selected fonts and how they are transferred to the printer. For maximum speed, use text in your document and use a printer resident font.
What causes repetitive marks on pages printed by Oki Printer?
Repetitive marks on pages printed by your Oki Printer are often caused by a damaged image drum cartridge, which results in marks every 1.6 inches (4.06 cm) due to surface nicks and scratches. Generate a cleaning page, repetitive marks may be temporary.
How to fix input jam on Oki B4200 Printer?
To address an INPUT JAM error on your Oki Printer: * Remove the paper tray from the printer. * Remove any crumpled or folded paper. * Remove any paper from the underside of the printer. * Replace the paper tray. After these steps, the printer should continue printing.
What causes fuzzy print on Oki Printer?
Fuzzy print on your Oki Printer is often caused by a dirty LED array. Clean the LED array to resolve this issue.
Why does my Oki B4200 print entire page faintly?
If your Oki Printer is printing an entire page faintly, it could be due to an empty toner cartridge. Pages tend to get fainter when the toner is used up, so install a new toner cartridge. You can also try cleaning the LED array.
Why is my Oki B4200 Printer printing smeared or blotched prints?
Smeared or blotched prints from your Oki Printer can be caused by dirty rollers, toner dropped inside the printer, or an image drum problem. Replace the image drum and toner.
What causes a page to have a grey background when printing with Oki B4200 Printer?
A grey background on pages printed from your Oki Printer is often caused by static electricity, generally from dry environments, which causes toner to stick to the background. To resolve this, change the paper to a smoother laser bond or use a humidifier to increase the humidity in the room.
Why is my Oki B4200 printing garbled?
If your Oki Printer is printing garbled output, it is possible that an incorrect driver is installed. Try installing an appropriate driver for your printer model.
Why is the print darker than usual on my Oki B4200 Printer?
If the print on your Oki Printer is darker than usual, the darkness setting may be too high. Try changing the darkness setting to a lower level.
To Next Page
General
