Oki B6250n Reference Guide

B6250/B6500 User’s Guide> 133
IP F ILTER F EATURE VIA IP A DDRESS L IST
This feature allows you to register the IP addresses of computers
that can be used in this printer. This will limit IP address used for
receiving print data.
From the printer’s web page:
1. Click [Network].
2. Click [IP Filtering] from the left menu.
3. Select the [Enable] and click the [Edit] button.
4. Set the IP address permitted for TCP/IP connection in
[Permitted IP Address].
5. Set the address mask in [IP Mask] corresponding to the
registered IP address in [Permitted IP Address]. For example,
if the [Permitted IP Address] is 129.249.110.23 and the [IP
Mask] is 255.255.255.0, the IP address for receiving print
data is 129.249.110.* (* is from 1 to 254). This means that
IP addresses from 129.249.110.1 to 129.249.110.254 can be
received.
6. Click [Submit] to reboot the printer.
N OVELL
N ETWARE
Q UEUE - BASED PRINTING
A NetWare printing system allows for creation and management of
queues for printing and other tasks.
Queue Management System (QMS) is the original name for queue-
based printing. It is not used in current documentation, but exists
still in some system messages.
Introduction
This section describes the features and capabilities of the B6250/
B6500 controller that enable support for Novell network printing.
The B6250/B6500 controller firmware has been designed to support
versions 5.1 and higher of the Novell NetWare operating system.
Some features may operate with earlier versions of NetWare.

Oki B6250n Specifications

General

Brand	Oki
Model	B6250n
Category	Printer
Language	English