B6250/B6500 User’s Guide> 163
4 Print human readable text completely below code
5 Print human readable text above code
Below are some options for this parameter.
Add 10 to print UPC/EAN/JAN checksum middle right rather
than bottom right of bar code (only applies to UPC/EAN/JAN
bar codes).
Add 10 to print start & end _*_characters with 39 bar code
text (only applies to code 39 bar codes).
Note: The first “add 10” is a description of how adding 10 is
interpreted with UPC/EAN/JAN (ONLY!) barcodes are printed. The
second “add 10” is a description of how it is interpreted for
CODE39 ONLY.
Add 100 to print checksum character with text.
Example: Print checksum character and text half-embedded below
barcode: 103p.
H
UMAN
R
EADABLE
I
NTERPRETATION
(HRI) F
ONT
C
ONTROL
“H” parameter Esc(s#h
This value control the font used for the printing of the HRI text. The
value represents the typeface of font to use:
0 Use Courier to print text (default)
1 Use Letter Gothic to print text
2 Use Univers to print text
3 Use Univers Condensed to print text
4 Use CG-Times to print text
5 Use OCR-B to print text (great with UPC/EAN)
The size of the font used for HRI is automatically selected based on
the size of the barcode.
B
ARCODE
H
EIGHT
S
PECIFICATION
“V” parameter Esc(s#v
To Next Page
Loading...
Need help?
General
