B6250/B6500 User’s Guide> 156
W
HEN
M
OVING
THE
P
RINTER
Carry out the following procedure when moving the printer.
CAUTION
• The machine, without the optional accessories, paper
trays, consumables and paper, weighs 18.8 kg. When
moving the equipment, make sure that there are two
or more persons carrying it.
• When lifting the machine, be sure to observe the
following points, failure to do so may cause the
machine to fall and result in injuries.
• 2 persons, one facing the front of the machine
(control panel) and the other facing the back,
should firmly grip the recessed areas on the
bottom part of both sides of the machine. Never
try to lift the machine by gripping any other areas.
• Bend your knees to avoid possible injuries to your
back.
• Do not tilt the machine more than 10 degrees
Important:
• If the duplex unit (optional) or Letter / A4 universal tray
(optional) has been installed, uninstall it before moving the
printer. If these are not fixed securely to the printer, they
may fall to the ground and cause injuries.
1. Press the power switch of this printer to the <O> position to
switch the power off.
2. Remove all cords, such as the power cord and interface
cables.
3. Remove any paper in the center output tray and return the
paper stopper to its original position if it’s raised.
To Next Page
Loading...
Need help?
General
