B6250/B6500 User’s Guide> 54
S
ETTING
P
APER
T
YPES
"Media Type" selects the type of material to print on.
Examples: Plain paper, Transparency, and Card stock. Ensure that
the selected media type is loaded into the selected input tray. Some
applications may override this setting.
Settings on the control panel are required for the types of paper
loaded in trays 1 to 4. For accurate image quality processing, refer
to the following table and set the paper types on the control panel.
Important:
• Paper type settings must match those of the actual paper
loaded in the trays. Otherwise, image quality cannot be
processed accurately. Toner may not fuse properly on the
paper, resulting in dirty and poor quality printouts.
• Changes in paper type settings on the printer driver are not
reflected in this printer.
Refer to:
• Paper sizes that can be loaded: “Usable Paper” on page 45
Paper types available:
MEDIA WEIGHT
Plain 68-105 gsm
Thin 64-67 gsm
Thick1 106-159 gsm
Thick2 160-216 gsm
Thick3* 106-216 gsm
*For rough or uneven media such as
envelope, choose Thick3. When
using Thick3, duplex is not available.
Plain Post Card Colored
Other Card Stock Letter Head
Thin Label Pre-Punched
Thick 2 Bond Transparency
Thick 1 Pre-Printed
Envelope Thick 3
To Next Page
Loading...
Need help?
General
