B6250/B6500 User’s Guide> 20
C
HECKING
S
TATUS
OF
P
RINT
D
ATA
Checking in Windows
Double-click the printer icon on the task bar at the bottom right
of the screen.
From the displayed window, check the column, [Status].
D
ISPLAYING
O
PTIONAL
A
CCESSORY
C
ONFIGURATION
AND
P
APER
T
RAY
S
ETTINGS
When using this printer as a network printer and with SNMP protocol
enabled, you can display on the printer driver, the optional
accessory configuration and settings configured at the control panel
such as paper type or size. The printer can by used on network, USB
or parallel. These settings are displayed on the [Options] tab. This
section explains the procedure using Windows XP as an example.
Important:
• When using a serial connection to this printer, this feature
cannot be used. You have to manually set the items on the
printer driver.
• The rear tray information cannot be obtained automatically.
You have to manually set the item.
• For paper size and paper type settings, you must configure
them at the control panel beforehand. Even if you change the
settings here, they will not be reflected on the printer itself.
To Next Page
Loading...
Need help?
General
