B6250/B6500 User’s Guide> 21
NOTE
> When using this feature on the network interface, you
have to activate the SNMP port (default: [Enable]) on the
printer using the control panel.
> For Windows NT 4. 0/Windows 2000/Windows XP, only
users with administrator’s rights can change the settings.
Users without administrator’s rights can only check the
contents.
1. From the [Start] menu, click [Printers and Faxes] and then
display the properties of the printer to be used.
2. Click the [Device Options] tab.
3. Click [Get Information from Printer].
NOTE
The properties of the printer can be displayed on the printer
driver.
4. Click [OK]. The contents of the [Device Options] tab will be
updated based on the data obtained from the printer.
To Next Page
Loading...
Need help?
General
