B6250/B6500 User’s Guide> 161
I
NTERPRETATION
OF
F
ONT
S
ELECTION
P
ARAMETERS
When the barcode properties are being determined, the standard
PCL font selection parameters take on new meanings that are
different from their traditional ones. Detailed descriptions of these
parameter follows.
<ESC>( #t#b#s#p#h#V
B
ARCODE
S
YMBOLOGY
T parameter Esc(s#T (Typeface): Controls what bar code system
to use (see table below)
“t” parameter Selects the barcode symbology to use when a reserved
typeface ID is selected.
“p” parameter Defines if/how text is printed with bars
“h” parameter Defines what font to use for that text
“y” parameter Bar code vertical size, in points (like fonts). 1 point size
= 1/72 inch.
“b” parameter Black bars widths (has up to 4 values separated by
commas or semicolons)
“s” parameter White bars widths (has up to 4 values separated by
commas or semicolons)
To Next Page
Loading...
