Oki C332dnw - Page 33

Operator panel > 33
PRINT
ADJUST
(cont.)
POSITION
ADJUST
(c
ont.)
TRAY2 X
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
th
e direction perpendicular to the direction the
paper runs, that is horizontally, in 0.25 mm
increments.
Any parts of the print image that are outside
th
e printable area
as a result of this shift will
be cropped.
Y
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
th
e direction the paper runs, that i
s vertically,
in 0.25 mm increments.
Any parts of the print image that are outside
th
e printable area
as a result of this shift will
be cropped.
DUPLEX
X
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
th
e direction perpendicular to the direction the
paper runs, that is horizontally, in 0.25 mm
increments.
Any parts of the print image that are outside
th
e printable area
as a result of this shift will
be cropped.
DUPLEX
Y
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
th
e direction the paper runs, that is vertically,
in 0.25 mm increments.
Any parts of the print image that are outside
th
e printable area
as a result of this shift will
be cropped.
PAPER BLACK SET +2
+1
0
-1
-2
Used for small adjustments when you
exper
ience fad
ed print or light specks /
streaking in monochrome printing on white
paper.
Select a higher value to reduce fading, or a
lo
wer valu
e to reduce specks or streaking in
high density print areas.
PAPERT COLOR SET +2
+1
0
-1
-2
As above, but for color printing.
SMR SETTING +3
+2
+1
0
-1
-2
-3
Sets a correction value for uneven print
quali
ty, to
correct print variations caused by
variations in temperature and humidity or in
print density/frequency.
BG SETTING +3
+2
+1
0
-1
-2
-3
Sets a correction value for dark-colored paper
printing, to correct print variations caused by
variations in temperature and humidity or in
print density/frequency.
ITEM SETTINGS EXPLANATION