Oki C332dnw - Page 32

Operator panel > 32
PRINT
ADJUST
POSITION
ADJUST
MP
TRAY
X
ADJUST
+2.00MILLIMETER
~
0.00MIL
LIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
th
e direction perpendicular to the direction the
paper runs, that is horizontally, in 0.25 mm
increments.
Any parts of the print image that are outside
th
e printable area
as a result of this shift will
be cropped.
Y
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
th
e direction the paper runs, that i
s vertically,
in 0.25 mm increments.
Any parts of the print image that are outside
th
e printable area
as a result of this shift will
be cropped.
DUPLEX
X
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
th
e direction perpendicular to the direction the
paper runs, that is horizontally, in 0.25 mm
increments.
Any parts of the print image that are outside
th
e printable area
as a result of this shift will
be cropped.
DUPLEX
Y
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
th
e direction the paper runs, that is vertically,
in 0.25 mm increments.
Any parts of the print image that are outside
th
e printable area
as a result of this shift will
be cropped.
TRAY1 X
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
th
e direction perpendicular to
the direction the
paper runs, that is horizontally, in 0.25 mm
increments.
Any parts of the print image that are outside
th
e printable area
as a result of this shift will
be cropped.
Y
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
th
e direction the paper runs, that i
s vertically,
in 0.25 mm increments.
Any parts of the print image that are outside
th
e printable area
as a result of this shift will
be cropped.
DUPLEX
X
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
th
e direction perpendicular to the direction the
paper runs, that is horizontally, in 0.25 mm
increments.
Any parts of the print image that are outside
th
e printable area
as a result of this shift will
be cropped.
DUPLEX
Y
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
th
e direction the paper runs, that is vertically,
in 0.25 mm increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
ITEM SETTINGS EXPLANATION