Oki C3600n - Page 138

C3600n User’s Guide
138
General Information
This utility creates an additional tab (STATUS) in the PostScript and
PCL drivers that allows the client to monitor the selected printer’s
status.
Load this program from the Menu Installer located on CD1.
Installation
1. Insert the Drivers, Color, and Network Utilities disk into the
CD-ROM drive.
If CD does not AutoPlay, click Start → Run → Browse.
Browse to your CD-ROM. Double-click Install.exe. Click
OK.
2. Click Network Software → Administration Tools → Network
Printer Status. Follow the on-screen instructions.