C3600n User’s Guide
139
Using
1. Click Start → Settings → Printers. Right-click the Sharp
Printer icon. Click Properties.
2. Click on the STATUS tab.
3. Click the UPDATE button to see device settings.
The following screen displays: NetStatus2K.jpg
Click on an item to see this information:
Trays: Paper Type, weight
Duplex: Installed/not installed
Disk/Memory: RAM size and % used;
Flash Memory size and % used
Toner Remaining: % toner remaining in all cartridges
NOTE
If the Automatic Status Check box is checked, this utility
“pings” the printer every time you open the Printer Properties
dialog in the printer driver.
This severely slows opening Printer Properties.
To Next Page
Loading...
