- 121 -
7. Operating Management/Specifications
Changing the Administrator Password
It is recommended to change the administrator password to protect your security. Set the
administrator password using from 6 to 12 alphanumeric characters. Be careful not to forget
the set password.
1
Press the button to select [Setting] and press the (ENTER) button.
2
Press the button several times to select [Admin Setup] and press the
(ENTER) button.
3
Enter the administrator password, and then press (ENTER).
The factory default password is "999999".
4
Press the button several times to select [Manage Unit] and press the
(ENTER) button.
5
Press the button several times to select [Admin Password] and press the
(ENTER) button.
6
Enter a new administrator password and press the (ENTER) button.
7
Enter the new administrator password again and press the (ENTER)
button.
8
Press the (BACK) button to display the [Ready To Print] message.
To Next Page
Loading...
Need help?
General
