- 17 -
2. Setting Up
Checking the Accessories
Check that you have everything shown below.
Be sure to use the supplied consumables first. If other consumables are used first, the life time may not be shown
correctly or supplied consumables may not be applied.
• Main body
• Four image drums (black, cyan, magenta and yellow)
• Four starter toner cartridges (black, cyan, magenta and yellow)
For the C model, the starter toner cartridges are installed in the image drums, which are
installed in the machine before shipment.
The starter toner cartridge is not installed in the ES model. Install the toner cartridge that is included in this machine.
Refer to "Replacing the Image Drum".
• Software DVD-ROM
• Power cord
• Envelope lever
The envelope lever is attached to the MP tray. Use the envelope lever if envelopes wrinkle
after being printed.
For instructions, refer to the Advanced Manual.
• LAN cables or USB cables are not included in the package. Prepare the cable that suits your connection
environment separately.
• Packaging and cushioning materials are used when transporting the machine. Do not dispose packaging materials
as they may be used in the future.
Injury may result.
Lift this machine by 2 persons, because it weighs approximately 23 kg.
To Next Page
Loading...
Need help?
General
