- 44 -
2. Setting Up
7
Press the button to select [Wireless(AP Mode) Setting] and press the
(Enter) button.
The [It is not possible to use the Wireless(AP Mode) at the same time.] message is
displayed for approximately five seconds.
8
Select [Enable] and then press the (Enter) button.
9
Press the button to select [Manual Setup] and press the (Enter) button.
10
Check the [SSID] and [Password] of the machine.
11
Enter the [SSID] and [Password] that you checked in step 10 to connect the
machine and your wireless device.
To Next Page
Loading...
