- 60 -
3. Basic Operations
•MP Tray
*1 Paper cannot be used for duplex printing.
*2 Width: 64 to 216 mm (2.5 to 8.5 inches), Length: 90 to 1,321 mm (3.5 to 52 inches)
Recommended Paper
The machine supports a variety of print media, including a range of paper weights
and sizes. This section describes how to choose and use media. To obtain the best
performance, use 75 to 90 g/m
2
plain paper that is designed for use in copiers and
laser printers. Use of heavily embossed or very rough textured paper is not
recommended. Pre-printed stationery can be used, but the ink must not offset
when exposed to the high fuser temperatures used in the printing process.
• Envelopes
Envelopes must be free from twists, curls or other deformations. The envelopes must also
be of the rectangular flap type, with glue that remains intact when subjected to hot roll
pressure fusing in the machine. Window envelopes are not suitable.
•Labels
Labels must be of the type recommended for use in copiers and laser printers, in which the
base carrier page is entirely covered by labels. Other types of label stocks may damage the
machine due to the labels peeling off during the printing process.
Available paper size Tray capacity Paper weight
A4
A5
A6
*1
B5
B6
*1
B6 Half
*1
Letter
Legal13
Legal13.5
Legal14
Executive
Statement
*1
8.5" SQ
Folio
16K(184x260mm)
16K(195x270mm)
16K(197x273mm)
Index Card
*1
4x6 inch
*1
5x7 inch
*1
Custom size
*2
Com-9 Envelope
*1
Com-10 Envelope
*1
Monarch Envelope
*1
DL Envelope
*1
C5 Envelope
*1
100 sheets
(if paper weight is 80 g/m
2
)
10 sheets (envelopes)
Light
(64 to 74 g/m
2
)
Medium Light
(75 to 82 g/m
2
)
Medium
(83 to 90 g/m
2
)
Medium Heavy
(91 to 104 g/m
2
)
Heavy
(105 to 120 g/m
2
)
Ultra Heavy1
(121 to 176 g/m
2
)
Ultra Heavy2
(177 to 220 g/m
2
)
To Next Page
Loading...
Need help?
General
