Oki C911 - Page 12

OkiDataCONFIDENTIAL
45530603TX - 12/130
(Note1 ) When Paper size is A4SEF(LetterSEF), to prevent damage due to abnormally high temperature of the fuser
end and may be migrating to the intermittent printing of continuous printing . So as not to migrate as much as possible
in this intermittent printing , the panel "Menus" - “PrintAdjust” - You can choose the mode that dropped the printing
speed by selection in the "Paper speed narrow " . There is a "normal " and " slow" choices , respectively , is a mode in
which you want to print at (A4LEF(LetterLEF) conversion ) 40ppm, 35ppm. The default is "slow" . However , very thin
paper paper thicker than (UltraLight) ~ MediaWeight this mode is applicable only (Heavy).
( Note2 ) When equipment installation environment of <16℃, print speed is down . I shall be down to 40ppm in A4LEF
conversion (22ppm in A3 conversion, 39.5ppm in LetterLEF). However, Media Weight is only when " MediumLight
( plain paper ) " setting " UltraLight ( very thin paper ) " - . For Auto, only if it detects the thickness of UltraLight ~
MediumLight equivalent , it is assumed that the speed down as well.
( Note3 ) Pro9541WT does not support duplex printing.
Table 4-1a. Special-paper Print Speed, In case Spot-color nothing and Spot-color White.
 (Accuracy within ±5%)
Mode
Media Media Type
Print Speed (ppm) -
MPT,Simplex
Color/
Monochrome
Printing
Labels (SEF)
Labels 1 Labels 1
16
Labels 2 Labels 2
12
Envelope
JIS Chou #3
Envelope
ENV
22
JIS Kaku #2
Envelope
ENV
10
Postcard (SEF）
Post Card Post Card
27
Return post card Return post card
22
Table 4-1b. Special-paper Print Speed, In case Spot-color Clear.
(Accuracy within ±5%)
Mode Media Media Type
Print Speed (ppm) -
MPT,Simplex
Color/
Monochrome
Printing
Labels (SEF)
Labels 1 Labels 1
12
Labels 2 Labels 2
12
Envelope
JIS Chou #3
Envelope
ENV
22
JIS Kaku #2
Envelope
ENV
10
Postcard (SEF)
Post Card Post Card
22
Return post card Return post card
18
(6) First-printout Time (Engine Performance)
The ‘first-printout time’ of C911/C931/C941/Pro9541WT means the time between the start of
printing of paper on the printer and the complete output of the paper from the exit roller of
the face-down paper output tray of the printer.
Table 5. First-printout Time
The condition is 25℃
Printing more Media size
Tray1
(max sec)
Tray2
(max sec)
Tray3
(max sec)
Tray4
(max sec)
Tray5
(max sec)
MPT
(max sec)
Monochrome／Color
50 ppm *1
A4 LEF(Plain) 8.0 8.5 9.0 9.5 10.0 8.0