Oki C911 - Outline of Control Commands; PJL Commands

沖データ企業秘密・OkiDataCONFIDENTIAL 
45530603TX - 93/130
9. Outline Of Control Commands
9.1 PJL Commands
Function
Code
Remark
Discard as comments
COMMENT
Set the JOB name
JOB[NAME=“job name”]
[START=first page][END=last page]
Set the JOB end
EOJ[NAME=“jobname”]
Set factory default values to menu and current PJL values
INITIALIZE
Set menu values to the current PJL values
RESET
Change menu values to the specified values
DEFAULT[LPARM:personality]
variable=value
Set PJL variables that are only valid in the same PJL job
SET[LPARM:personality]
variable=value
Return values within PJL
INQUIRE[LPARM:personality]
variable
Return menu setting values
DINQUIRE[LPARM:personality]
variable
Return the printer environment, PJL setting values, and the
selection range
INFO category
Return the same strings as the <Words> received
ECHO[<Words>]
Designate the command setting values that returns the
status voluntarily from a printer to a host.
USTATUS variable=value
Cancel the status that a printer return the status to a host
voluntarily
USTATUSOFF
Display the designated message on the control panel
OPMSG DISPLAY=“message”
Display the designated message on the control panel
instead of ON-LINE message
RDYMSG
DISPLAY=“message”
Display the designated message on the control panel and
set a printer to OFFLINE
STMSG DISPLAY=“message”
Print the File List(in mounting the FileSystem)
OKIINFOPRINT FILELIST=ALL
Print demo pages
OKIINFOPRINT DEMO=DEMO1