Oki C911 - Print Media Specifications

沖データ企業秘密・OkiDataCONFIDENTIAL 
45530603TX - 13/130
Note1) When media weight fixed within Ultra-Light to Medium-Light, and spot-color print don't use.
(7) Warm-up Time
The warm-up time of C911/C931/C941/Pro9541WT is the time between the power-off, or
power-saving, state and running state of the printer. During the warm-up time, the printer
does not print.
Condition Warm-up time (max.) *1
Cold Start (from Power-off State): approx. 50 seconds
Wake-up (from Power-saving Mode): approx. 35 seconds
Note1) : condition : 25
o
C, Humidity＜65%RH and nominal line voltage
Except for changing the supply units.
Except for density correction and color correction.
In case of Network environment etc, it is possible to change the warm-up time.
2.1.2 Print Media Specifications
(1) Requirements for Print Paper
The paper used for C911/C931/C941/Pro9541WT is cut-sheet plain paper and special paper
specified. The paper handling performance of the printer is optimized for basic paper,
which is:
- Excellent White A4, 70 kg (82 gsm) and PPR-CA4NA in type name.
All the print media used for the printer should be 210-˚C, 0.2-second, 25-psi fusing process
temperature and pressure proof.
If printing on the following paper, thoroughly test the print quality and paper feeding
performance ,and confirm that there are no problems before use.
 Embossed, glossy or coated paper;
The following paper should not be used for the printer:
 Paper with too-smooth or rough (textured or fibered) surfaces, or differently textured
front and back surfaces;
 Too light or too heavy paper, or paper with many powdery paper chips;
 Wet or damp paper;
 Paper with static cling;
 Grained, embossed or coated paper;
 Non-heat-proof paper having surfaces treated with glue or chemicals;
 Paper with binding holes, perforations, cuts or holes;
 Paper having cut edges with projections, depressions or burrs;
 Paper with non-rectangular or right-angled corners;
 Creased, warped, corner-folded, wavy, folded or torn paper;
 Paper with fasteners, including staples, clips, ribbons, tape and metal;
 Special paper, including carbon paper, non-carbon paper, thermal paper and
pressure-sensitive paper.
 Thermal transfer printer paper, wet PPC paper, Japanese paper, multipart form paper or
ink-jet paper.
Note 1: The printer may produce a thin film of toner over heavy paper when it prints the
paper or, on heavy paper, may print images lighter than user-specified ones.
Note 2: Paper of which predominant fiber orientation is not vertical to its edge the printer
3
3