3
3-80 ColorWise Pro Tools
C9800 Color Guide - 80
• Color spacing
• Lightness or Saturation neighbors selected
• Output profile selected
The goal of the Spot-On Color Search is to find the color values that make a printed
color patch match a target, not the screen simulation of it. Printing a Print Pattern of
the neighbor color patches allows you to compare the printed patches to the color
target. Once you compare the printed patches and find the one that matches most
closely, you can then select the corresponding patch on the screen.
7. When you have selected the desired target color in the Spot-On Color Search window,
click OK.
The edited color appears in the color list of the main Spot-On window.
TO TARGET A COLOR USING EXACT CMYK VALUES
1. Click the center patch in the Spot-On Color Search window.
The Set Center Patch Color dialog box appears.
2. Select how you want to enter the CMYK values.
The Percentages option allows you to enter color values between 0 and 100%, in
increments of 0.5. Values out of this range are rounded to the nearest whole or half
percentage.
The Device Codes option allows you to enter color values between 0 and 255. This
option reflects the full range of color values that the Fiery can actually reproduce, and
provides finer gradations of color than are possible with Percentages.
3. Enter the C, M, Y, and K values of your specific color in the appropriate fields.
To Next Page
Loading...
Need help?
General
