A
A-87 Color Measurement Instruments
C9800 Color Guide - 87
N
OTE: For Mac OS computers with a USB port (for example, an iMac), you need an
adapter to connect the DTP41 to your computer. For information on supported
adapters, see the X-Rite, Inc. web site (www.x-rite.com).
5. Use the AC adapter to provide power.
Plug the small connector on the adapter cable into the power input of the X-Rite
DTP41 and plug the AC adapter into the power cord. Plug the power cable into a wall
outlet.
6. Turn on the computer.
7. Calibrate the X-Rite DTP41 using ColorWise Pro Tools (see the following section).
8. Calibrate the Fiery using ColorWise Pro Tools and the DTP41 (see page 2-50).
Calibrating the DTP41
For the best color accuracy, calibrate the X-Rite DTP41 spectrophotometer every time
you calibrate the Fiery. You can initiate the calibration sequence in ColorWise Pro
Tools Calibrator as part of the process of Fiery calibration. The computer may also
prompt you that it is necessary to calibrate the spectrophotometer.
Alternatively, you can initiate the DTP41 calibration process using the Instrument
button on the DTP41. For more information on this method, see the documentation
that came with the X-Rite DTP41.
AC adapter
Small connecto
Power cord
To Next Page
Loading...
Need help?
General
