Oki C9800 GA Color Guide

A
A-84 Color Measurement Instruments
C9800 Color Guide - 84
This appendix explains how to set up and calibrate the following color measurement
instruments:
• X-Rite DTP41 automatic scanning spectrophotometer
• X-Rite DTP32 automatic scanning densitometer
Using the X-Rite DTP41 spectrophotometer
ColorWise Pro Tools Calibrator supports the X-Rite DTP41 spectrophotometer, a
device that measures density and color data. The DTP41 communicates directly with
the Calibrator application in ColorWise Pro Tools, sending measurements to the Fiery
automatically.
Setting up the DTP41
Before you calibrate the Fiery, you must connect, configure, and calibrate the
spectrophotometer to prepare for measuring the printed patches. For additional
information about setting up and using the DTP41, see the documentation included
with the instrument.
TO CONNECT THE X-RITE DTP41 TO THE COMPUTER
1. Turn off the computer.
2. Unpack the X-Rite DTP41 and remove the spacer from the measurement page slot.
Appendix A:
Color
Measurement
Instruments

Oki C9800 GA Specifications

General

Brand	Oki
Model	C9800 GA
Category	Printer
Language	English