Oki MB441MFP - Page 110

Windows Utilities
-110-
 Exporting Profiles to a File.
1 Select machine from which to export,
from the [Registered Device Table].
2 Select the [User Setting] tab.
3 Click on [Profile Manager].
4 Enter the administrator password and
click [OK].
5 Click .
6 Check the contents of the displayed
message and click [OK].
7 Enter the file name, select the folder to
save the file to, and click [Save].
Note
 After exporting, the edited CSV file may not restore
properly.
 Importing Profiles from a File.
1 Select machine from which to import,
from [Registered Device Table].
2 Select the [User Setting] tab.
3 Click on [Profile Manager].
4 Enter the administrator password and
click [OK].
5 Click .
6 Check the contents of the displayed
message text and click on [OK].
7 Select the file you want to import and
click on [Open].
8 Select the settings to import and click
[Import].
9 Click .
Setting a PIN
You can control access to the machine.
 Icon
The meaning of each icon is as shown below.
 Create a new PIN
1 Select the machine from the
[Registered Device Table].
2 Select the [User Setting] tab.
3 Click on [PIN Manager].
4 Enter the administrator password and
click [OK].
5 Click .
6 Click .
7 Enter the PIN number you would like to
use.
8 Check each item as required and click
[OK].
9 Click .
 Changing PIN Settings
1
Select the machine from the
[Registered Device Table].
2 Select the [User Setting] tab.
3 Click on [PIN Manager].
4 Enter the administrator password and
click [OK].
5 Click .
6 Select the PIN number for which you
want to change the settings.
7 Change settings as required and click on
[OK].
8 Click .
 Deleting a PIN
1 Select the machine from the
[Registered Device Table].
Icon Details
Registers a new PIN.
Registers a new user.