Network Setting Items
-137-
Network Settings
8
SNMP Trap
- Auth Key - - - (NULL) Sets the authentication key for SNMPv3
packet authentication in HEX code.
Maximum number of characters depends
on the algorithm you select.
Authenticati
on Settings
Algorithm
Auth
Algorithm
- - - MD5 Specifies the algorithm for SNMPv3
packet authentication.
Encryption
Settings
Passphrase
Privacy
Passphrase
- - - (NULL) Sets the password to create an
authentication key for SNMPv3 packet
encryption. From 8 to 32 characters can
be used.
- Privacy Key - - - (NULL) Sets the authentication key for SNMPv3
packet encryption in HEX code. Sixteen
octets (32 characters of HEX code) can
be used.
Encryption
Settings
Algorithm
Privacy
Algorithm
- - - DES Specifies the algorithm for SNMPv3
packet encryption. You cannot change
this value.
New SNMP
Read
Community
Read
Community
- - - public Sets the read community for SNMPv1 up
to 15 characters.
New SNMP
Write
Community
Write
Community
- - - public Sets the write community for SNMPv1
up to 15 characters.
Item
Factory
Default
Setting
Description
Web
page
TELNET
Configurati
on Tool/
Network
Setting
Plug-in
Network Card Setup
(Windows) (Mac OS X)
Printer Trap
Community
Name Set
Prn-Trap
Community
- - - public Sets the community name for a printer
trap up to 31 characters.
Address 1-5 TCP #1-5
Trap
Address
- - - 0.0.0.0 Specifies a trap destination in TCP/IP.
You can specify up to 5 destinations.
Trap Enable
1-5
TCP #1-5
Trap Enable
- - - Disable Specifies whether to use a printer trap in
TCP #1-5.
Printer
Reboot 1-5
TCP #1-5
Printer
Reboot Trap
- - - Disable Specifies whether to send an SNMP
message when the machine has
rebooted.
Receive
Illegal Trap
1-5
TCP #1-5
Receive
Illegal Trap
- - - Disable Specifies whether to use a trap when a
community name other than the one set
in [Printer Trap Community Name
Set] is used to access the machine.
Online 1-5 TCP #1-5
Online Trap
- - - Disable Specifies whether to send an SNMP
message every time the machine comes
online.
Offline 1-5 TCP #1-5
Offline Trap
- - - Disable Specifies whether to send an SNMP
message every time the machine goes
offline.
Item
Factory
Default
Setting
Description
Web
page
TELNET
Configurati
on Tool/
Network
Setting
Plug-in
Network Card Setup
(Windows) (Mac OS X)
To Next Page
Loading...
