Oki MB441MFP - Printing out PS Errors; Changing Emulation Mode

Useful Operations for Printing From a Computer
-68-
Printing Out PS Errors
You can print out a PostScript error when it
occurs.
Note
 This function is not available with the Windows PCL printer
driver and the Windows PCL XPS printer driver.
For Windows PS Printer Driver
1 Open the file you want to print.
2 From the [File] menu, select [Print].
3 Click [Preferences].
4 On the [Layout] tab, click [Advanced].
5 Click [Send PostScript Error Handler]
under [PostScript Options] and select
[Yes] from the drop-down list.
6 Click [OK] until the print setup dialog
box is closed.
For Mac OS X PS Printer Driver
Note
 This function is not available with the Mac OS X 10.5 to
10.7.
1 Open the file you want to print.
2 From the [File] menu, select [Print].
3 Select [Error Handling] from the panel
menu.
4 Select [Print detailed report] at
[PostScript Errors].
5 Click [Print].
Changing Emulation Mode
You can select the emulation mode.
Memo
 To en t er th e [Admin Setup] menu, an administrator
password is necessary. The default password is "aaaaaa".
1 Press the <SETTING> key on the
operator panel.
2 Press the to select [Admin Setup]
and then press .
3 Enter the administrator password.
4 Select [Enter] and then press .
5 Press the to select [Print Setup] and
then press .
6 Press the to select [System
Configuration Menu] and then press .
7 Make sure [Personality] is selected and
then press .
8 Press the to select an emulation mode
and then press .
9 Press the until the top screen appears.
OK
OK
OK
OK
OK
OK