Oki MB441MFP - Updating a Scanner Driver

Deleting or Updating the Drivers
-171-
Troubleshooting
10
6 Close the [Devices] dialog box.
7 From the hard disk, select
[Applications]>[Okidata]>[Scanner].
8 Delete network scanner setup tool.
9 Restart the computer.
Updating a Scanner Driver
You can update scanner drivers.
Note
 You must be logged on as an administrator to complete
this procedure.
For Windows
1 Click on [Start], right click [Computer]
Select [Properties].
2 Click [Device Manager].
If the [User Account Control] dialog box
appears, click [Yes].
3 Right click the [MB4x1/ES41x1/
MPS42x] icon on [Imaging Device]
and click on [Properties].
4 Check the version of the scanner driver
on the [Drivers].
5 Delete the scanner driver.
Reference
 "Deleting a Scanner Driver" P. 170
6 Install a new scanner driver.
Reference
 For details on how to install a driver, refer to the User’s
Manual Basic.
For Mac OS X
1 Delete the scanner driver.
Reference
 "Deleting a Scanner Driver" P. 170
2 Install a new scanner driver.
Reference
 For details on how to install a driver, refer to the User’s
Manual Basic.