Oki MB441MFP - Changing Settings on Ethertalk (for Mac os Only) (Mb451;Mb451 W;Mb471;Mb471 W;Mb491;Es4191 MFP Only)

Changing Network Settings From the Web Page
-159-
Network Settings
8
5 Follow the on-screen instructions to
specify detailed settings.
Memo
 Be sure to specify the correct settings for your mail
server. If you enable APOP when your mail server does
not support the APOP protocol, e-mails may not be
received correctly.
 When you specify a domain name for the mail server,
configure the DNS server in the [TCP/IP] setting.
6 Click [Send].
Memo
 If the POP server does not support the SSL encryption, e-
mails may not be received correctly.
 Configuration for SMTP
1 Access the machine's web page and log
in as the administrator.
2 Select [Admin Setup].
3 Select [Network Manager]>[E-mail] >
[Receive Settings].
4 Select [SMTP] and then click [To
STEP2].
5 Follow the on-screen instructions to
specify detailed settings.
6 Click [Send].
Changing Settings on EtherTalk (for Mac
OS only) (MB451/MB451w/MB471/
MB471w/MB491/ES4191 MFP Only)
Note
 EtherTalk cannot be used with Mac OS X 10.6.
Changing EtherTalk Machine Name
1
Access the machine's web page and log
in as the administrator.
2 Select [Admin Setup].
3 Select [Network]>[EtherTalk].
4 Enter a new name in [Printer Name].
5 Click [Submit].
Changing EtherTalk Zone
1 Access the machine's web page and log
in as the administrator.
2 Select [Admin Setup].
3 Select [Network]>[EtherTalk].
4 Enter a new zone name in [Zone
Name].
5 Click [Submit].
Note
 Be sure to specify a zone within the same segment.