Oki MB441MFP - Reception Using a Sub Address (Fcode Polling); Transmission Using a Sub Address (Fcode Transmission)

Various Functions for Transmission
-22-
b) Enter a value between 0 and 31 (days),
and then press
.
Memo
 When [00] (day) is set, data is retained for an
indefinite period.
19 Press .
 For Fcode Bulletin Board Commu-
nication
1 Press the <SETTING> key.
2 Press the to select [Admin Setup]
and then press .
3 Enter the administrator password.
4 Select [Enter] and then press .
5 Press the to select [Fax Setup] and
then press .
6 Press the to select [Fcode Box] and
then press .
7 Press the to select a box number and
then press .
8 Check that [Register] is selected and
then press .
To edit the registered Fcode Confidential Box,
select [Edit].
9 Press the to select [Bulletin Box] and
then press .
10 Check that [Box Name] is selected and
then press the .
11 Enter a box name.
12 Select [Enter] and then press .
13 Press the to select [Sub-Address]
and then press .
14 Enter a sub address.
15 Select [Enter] and then press .
16 Press .
Transmission Using a Sub Address
(Fcode Transmission)
By entering a sub address, Fcode confidential
transmission and Fcode bulletin board
transmission can be done.
Memo
 Be sure to check a destination sub address.
1 Place your document with text face up in
the ADF or face down on the document
glass.
2 Press the <FAX/HOOK> key.
3 Check that [Fax] is selected and press
to open the fax start screen.
4 Press the to select [Fax Functions]
and then press .
5 Press the select [Fcode Tx] and then
press .
6 Press the to select [ON] and then
press .
7 Enter the sub address of the box
registered in the recipient machine.
8 Select [Enter] and then press .
9 Press the until the start screen
appears.
10 Press the to select [Add Destination]
and then press .
11 Specify a destination.
12 Press .
Reception Using a Sub Address
(Fcode Polling)
You can perform Fcode polling by entering the
sub address of a sender machine's bulletin box.
This function makes a remote fax machine
transmit a fax in response to instructions from
your machine.
Note
 You cannot receive data if the sender has a password on
the bulletin box.
1 Press the <FAX/HOOK> key.
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
MONO