Oki MB441MFP - Setting Prefix (Prefix); Registering a Prefix; Using a Prefix When Registering a Number to Speed Dial; Using a Prefix When Transmitting Faxes

Useful Operations for Transmission
-17-
Faxing
2
Setting Prefix (PreFix)
You can add a prefix to a destination number. You
can also attach a prefix when registering a number
to speed dial.
Registering a Prefix
You must register the prefix to [PreFix] in
advance. You can register up to 40 digits.
1 Press the <SETTING> key.
2 Press the to select [Admin Setup]
and then press .
3 Enter the administrator password.
4 Select [Enter] and then press .
5 Press the to select [Fax Setup] and
then press .
6 Press the to select [Other Settings]
and then press .
7 Press the to select [Prefix] and then
press .
8 Enter a prefix.
9 Select [Enter] and then press .
10 Press the until the top screen appears.
Reference
 You can use symbols such as # and *. For details, refer to
the User's Manual Basic.
Using a Prefix When Transmitting
Faxes
You can attach a prefix only when you enter a
destination number using the ten-key pad.
Perform the following procedures when
specifying a destination using the ten-key pad.
1 On the destination entry screen, press
the and to select [PreFix:N] and
then press .
The area code is displayed as "N".
2 Enter a destination number.
3 Select [Enter] and then press .
Memo
 You cannot enter a prefix and then use speed dial.
Using a Prefix When Registering a
Number to Speed Dial
You can attach a prefix to a speed dial number.
Perform the following procedures to register a
number to speed dial.
Reference
 For details on how to register a number to speed dial, refer
to the User's Manual Basic.
1 On the fax number entry screen to
register a number to speed dial, press
the and to select [PreFix:N] and
then press .
The area code is displayed as "N".
2 Enter a fax number.
3 Select [Enter] and then press .
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK