Oki MB441MFP - Network Card Setup

Mac OS X Utilities
-126-
5 Select [Import] from the [File] menu.
6 Select the CSV file created in procedure
3 and click [Open].
7 Click on [Save].
8 Enter the password and click on [OK].
9 Quit Print Job Accounting Client.
Changing User ID and Username.
You can use this utility to change the username
and user ID.
1 Launch the Print Job Accounting Client
utility.
2 Select the user you want to change and
click on [Edit].
3 Enter the new user ID and username and
click on [Save].
4 Click on [Save].
5 Enter the password and click on [OK].
6 Quit Print Job Accounting Client.
Deleting User IDs and Usernames
You can use this utility to delete a username and
user ID.
1 Launch the Print Job Accounting Client
utility.
2 Select the user you want to delete and
click [Delete].
3 Click on [Save].
4 Enter the password and click on [OK].
5 Quit Print Job Accounting Client.
Network Card Setup
You can use the Network Card Setup to configure
the network.
In order to use Network Card Setup, TCP/IP
needs to be activated.
Note
 Configure the TCP/IP settings.
 Even when connected using a wireless LAN, the displayed
MAC address becomes the MAC address of the wired LAN.
Configure the IP Address
1 Launch Network Card Setup.
Reference
 "Installing Utilities" P. 102
2 Select the machine.
3 Select [IP Address...] from the
[Printer] menu.
4 Configure the settings as required and
click [Save].
5 Enter the password and click on [OK].
- The default password is the last 6 alphanumerical
digits of the Mac address.
- The password is case sensitive.
6 Click on [OK] to activate the new
settings.
Restart the machine network card.
Configure Web settings
You can launch the webpage, and configure the
machine network settings.
 Enabling Web Settings
1
Select [Web Page Settings...] from the
[Printer] menu.
2 Select [Enable] and click on [Set].