List of the Device Setting Menu Items
-94-
IP Address Set Auto Sets the method of setting up IP address.
Display condition: TCP/IP protocol is
enabled and the IP version is not set to
IPv6.
IPv4 Address 192.168.100.
100
Sets an IP address.
Display condition: TCP/IP protocol is
enabled and the IP version is not set to
IPv6.
Subnet Mask 255.255.255.
0.
Sets a subnet mask.
Display condition: TCP/IP protocol is
enabled and the IP version is not set to
IPv6.
Gateway Address 0.0.0.0 Sets a gateway address.
Display condition: TCP/IP protocol is
enabled and the IP version is not set to
IPv6.
DNS Server (Primary) 0.0.0.0 Sets an IP address for primary DNS
server. Display condition: TCP/IP protocol
is enabled and the IP version is not set to
IPv6.
DNS Server (Secondary) 0.0.0.0 Sets an IP address for secondary DNS
server. Display condition: TCP/IP protocol
is enabled and the IP version is not set to
IPv6.
WINS Server (Primary) 0.0.0.0 Sets a name or an IP address for the
WINS server.
Display condition: TCP/IP protocol is
enabled and the IP version is not set to
IPv6.
WINS Server (Secondary) 0.0.0.0 Sets a name or an IP address for the
WINS server.
Display condition: TCP/IP protocol is
enabled and the IP version is not set to
IPv6.
Web Enable Sets whether to enable access from a web
browser.
Display condition: TCP/IP protocol is
enabled.
Telnet Disable Sets whether to enable access from the
Telnet.
Display condition: TCP/IP protocol is
enabled.
FTP Disable Sets whether to enable access from FTP.
Display condition: TCP/IP protocol is
enabled.
IPSec Disable This item is displayed and it can be dis-
abled only when IPSec is set to valid.
SNMP Enable Sets whether to enable access from SNMP.
Display condition: Netware is enabled and
TCP/IP is enabled.
Item
Factory
Default
Description
To Next Page
Loading...
