44952001TH Rev.2
7-20
Oki Data CONFIDENTIAL
7. TROUBLESHOOTING PROCEDURES
No. Category
PJL Status
Code
Error Warning Description
7 Warning 10979 1
2
3
4
5
Fuser Unit Near Life
Please see Help for details.
Notifies the fuser unit is
near its life.
Moreover, when set
as"AdminSetup"-
"Management"-"System
Setup"-"NearLife
LED"=Disable,Alarm
LED is switched off.
%COLOR%
Y
M
C
K
*In FX750, there is not
%COLOR% information
because 4 image drum
unit is one body model.
8 Warning 10978 1
2
3
4
5
Belt Unit Near Life
Please see Help for details.
Notifies the belt unit is
near its life. This is a
warning; thus, printing will
not stop.
Moreover, when set
as"AdminSetup"-
"Management"-"System
Setup"-"NearLife
LED"=Disable,Alarm
LED is switched off.
9 Warning 10091 1
2
3
4
5
Please change Fuser Unit.
Please see Help for details.
Notifies the life of the
fuser unit (warning).
This appears when the
cover was opened and
closedjustafterthefuser
life error occurred.
10 Warning 10080 1
2
3
4
5
Please change Belt Unit.
Please see Help for details.
Notifies the life of the belt
unit (warning).
This appears when the
cover was opened and
closedjustafterthebelt
life error occurred.
No. Category
PJL Status
Code
Error Warning Description
11 Warning 10966 (Y)
10967 (M)
10968 (C)
10965 (K)
1
2
3
4
5
%COLOR% Toner Empty
Please see Help for details.
Notifies the toner is
empty. This is a warning
only.
This appears when the
cover was opened and
closedjustafterthetoner
empty error occurred.
%COLOR%
Y
M
C
K
12 Warning 10939 (Y)
10940 (M)
10941 (C)
10938 (K)
1
2
3
4
5
%COLOR% Toner Cartridge not
installed.
Please see Help for details.
Notifies the toner
cartridge is not installed.
This is a warning only.
%COLOR%
Y
M
C
K
13 Warning 10970 (Y)
10971 (M)
10972 (C)
10969 (K)
1
2
3
4
5
Please install new Image Drum
Unit.
Please see Help for details.
Notifies the life of the
drum. This is a warning
only.
This appears when the
cover was opened and
closedjustafterthedrum
life error occurred.
14 Warning 10053 1
2
3
4
5
Belt Reflex Error Belt Reflex Check Error.
PU firmware does not
notify this warning to
CU firmware at the
time of Shipping Mode.
Therefore, this status
does not occur in a user
environment.