Oki MC562w - Page 306

44952001TH Rev.2
8-25
Oki Data CONFIDENTIAL
8. CONNECTION DIAGRAMS
8.3 Firmware Information
8.3.1 ROM control numbers
(1) Printer ROM
The following firmware are stored into CU/PU board.
<Firmware for FX750MLK>
Firmware (PJL format) Epsilon # Notes
CU-Loader 44614402FY01 Binary file for FLCS1
CU/PU/NIC 44614502FY01 Binary file for IC15
44614502FY02 PJL file for CU rewriting
44614502FY03 PJL file for NIC rewriting
44614502FY04 PJL file for PU rewriting
IM 44553104FY01 PJL file for IC10 rewriting
Scanner-Loader 44970001FY01 Binary file for IC509
Scanner 44970101FY01 Binary file for IC14
<Firmware for FX750MLK_WLAN/EDT>
Firmware (PJL format) Epsilon # Notes
CU-Loader 44614403FY01 Binary file for FLCS1
CU/PU/NIC 44614505FY01 Binary file for IC15
44614505FY02 PJL file for CU rewriting
44614505FY03 PJL file for NIC rewriting
44614505FY04 PJL file for PU rewriting
IM 44553105FY01 PJL file for IC10 rewriting
Scanner-Loader 44970002FY01 Binary file for IC509
Scanner 44970102FY01 Binary file for IC14
(2) Scanner ROM
The following firmware are stored into SU board.
Firmware (PJL format) Epsilon # Notes
Scanner FW (Loader) 44970001FY01 IC509 (PCB Assy.-MHE)
Scanner FW (Main) 44970101FY01 IC14 (PCB Assy.-MHE)
8.3.2 Instruction of FW update
(1) FirmSuite includes all FWs ilsted below,
The following is the updating order of FWs.
SU FW
Starting Logo NIC FW PU FW CU FW
(2) Don't turn off the machine while it displays the message below,
"Waitamoment.Executingmaintenance".
Please follow the steps below,
i) Turn OFF/ON the machine.
ii) Send Firm Suite
iii) Themachinedisplays"Waitamoment.Executingmaintenance".
iv) Themachinedisplays"PASSED".
iv) Turn OFF/ON the machine.
v) Check the firmware version.
Note! This FW update should be removed the TEL cabel from the Scanner unit of
the mainbody.