To Next Page

To Previous Page

EDITING FUNCTIONS

- 100 -

Press [JOB BUILD] on the EDIT menu.

Press [OK].

Job build is now set and the message below appears.

Place the first stack of originals, and then

select settings.

Memo

• When placing the original on the document glass,

remember that 1 page is equal to 1 job.

• When placing mixed-size originals on the RADF, see

the following page:

 Basic Guide

• If you want to use a particular tray, select it.

Note

• Press [SETTINGS] on the touch panel to confirm the

current settings.

• If you want to change the settings, press the [RESET]

button on the control panel, and then restart the

procedure from step 1.

Press the [START] button on the control

panel.

Scanning starts. When the scanning of all the originals is

finished, the message below appears.

Place the next stack of originals, and then

select the settings.

Repeat steps 4 and 5 until all the desired pages have

been scanned.

Note

• If you do not change any settings, those for the last job

will be applied.

When the scanning of all the originals is

finished, change the number of copy sets

as required. Then press [JOB FINISH] on

the touch panel.

Copying starts. If any storing function is set, that will also

start.

Oki mc760x User Manual

Questions and Answers: