Specifications
- 349 -
Scanning Specifications
Inner Finisher
Output method Face up/Face down
Paper output capacity Finisher not installed model
• Face up: 100 sheets (less than 80 g/m
2
), 10 sheets (ultra-heavy/envelopes)
• Face down: 500 sheets (less than 80 g/m
2
)
Finisher installed model
• Face up: 100 sheets (less than 80 g/m
2
), 10 sheets (ultra-heavy/envelopes)
• Face down: 100 sheets (less than 80 g/m
2
)
• Finisher: 500 sheets (less than 80 g/m
2
)
Print guaranteed area 6.35 mm or more from the paper edge (not applicable to special media such as envelopes)
Print precision Print beginning:± 2 mm, paper skew:± 1 mm/100 mm,
image expansion:± 1 mm/100 mm (80 g/m
2
)
Warm-up time • From power on: 60 seconds (at room temperature 25°C, rated voltage)
• From power save mode: 35 seconds (at room temperature 25°C, rated voltage)
Operating environment • When in operation: 10 - 32°C / Relative Humidity of 20 - 80% (maximum wet bulb temperature of 25°C, maximum
dry bulb temperature of 2°C)
• When not in operation: 0 - 43°C / Relative Humidity of 10 - 90% (maximum wet bulb temperature of 26.8°C,
maximum dry bulb temperature of 2°C)
Conditions for the guarantee
of print quality
• Operating Range:
Temperature 10°C, humidity 20 to 80% RH
Temperature 32°C, humidity 20 to 60% RH
Humidity 20% RH, temperature 10 to 32°C
Humidity 80% RH, temperature 10 to 27°C
• Full-color Print Quality Assured Range:
Temperature 17 to 27°C, humidity 50 to 70% RH
Consumables, Maintenance
Unit
Toner cartridges, image drum, belt unit, fuser unit
Type Flat surface scanning system
(When the Reversing Automatic Document Feeder is installed: Fixed scanning system by feeding the original)
Image Sensor Color CIS
ADF paper weight
60-105g/m
2
(15 - 26.3 lb.)
ADF paper capacity
100 sheets (80g/m
2
(20 lb.))
Acceptable size Scanner part : Max:215.9 x 355.6
ADF : Max:215.9 x 355.6
Min:105 x 148.5
Feeding speed Max.40 pages/min.
Unit life Scanner part : 5 years or 50,000 times for page scanning
ADF : 5 years or 240,000 times for page scanning
Type Inner Finisher
Power source Supplied from the equipment
Dimensions 388.1 mm (15.28") (W) x 305.8 mm (12.04") (D) x 213.4 mm (8.40") (H) (Excluding the tary)
Weight Approx. 9kg (19.84 lb.)
Power consumption 40 W max.