PRINTING FROM Macintosh
- 65 -
4) Booklet Outer Margin
Select the width of the margin added to the short edge side
of a sheet.
Cover Pages
In the Cover Pages menu, you can set Front Cover printing
and Back Cover printing.
• This option menu cannot be set when the Cover Page
option for sending a print job with a banner page is enabled.
1) Use Front Cover
This sets front cover printing which allows you to insert or
print a cover on a sheet fed from a different tray or the
multi-purpose tray.
To enable cover printing, select this check box and select
the location from where a cover sheet is to be fed and the
print style to be used.
Source
Select from where the cover sheet is to be fed. When [Auto
(Default)] is selected, the paper is automatically selected
according to the printed document size.
• The selectable values in the [Source] box vary
depending on the optional devices installed in this
equipment and their configuration on the Paper Feed
menu.
Print Style
This selects how to print the cover.
- Do not print on page
— Select this to insert a blank
cover.
- Print on page — Select this to print the first page
image on the front side of a cover. When the Two-Sided
Printing option is enabled in the Layout menu, the first
two page images are printed on both sides of a cover.
- Print on 1 side of the page — Select this to print the
first page image on the front side of a cover. This is
available only when the Two-Sided Printing option is
enabled in the Layout menu.
2) Use Back Cover
This sets back cover printing which allows you to insert or
print a back cover on a sheet fed from a different tray or the
multi-purpose tray.
To enable back cover printing, select this check box and
select the location from where a back cover sheet is to be
fed and the print style to be used.
Source
Select from where the cover sheet is to be fed. When [Auto
(Default)] is selected, the paper is automatically selected
according to the printed document size.
• The selectable values in the [Source] box vary
depending on the optional devices installed in this
equipment and their configuration on the Paper Feed
menu.
Print Style
This selects how you want to print a back cover.
- Do not print on page
— Select this to insert a blank
back cover.
- Print on page — Select this to print the last page image
on the front side of a back cover. When the Two-Sided
Printing option is enabled in the Layout menu, the last
two page images are printed on both sides of a back
cover.
- Print on 1 side of the page — Select this to print the
last page image on the front side of a back cover. This
is available only when the Two-Sided Printing option is
enabled in the Layout menu.
Quality
In the Quality menu, you can specify various image quality
features.
• This option is available only when your equipment is a
multifunctional digital system (Black and White MFP).
1
2