Oki MC780 series User Manual

- 42 -
Installing Additional Tray Units
1
2
4
5
6
3
Protocol: Line Printer Daemon - LPD
Address: <IP address or DNS name of this
equipment>
Queue: print
Name: <Any Name>
Location: <Any Name>
Print Using: MC780_ES7480 MFP_
MPS4242mc-X7
Memo
•
For MAC OS X 10.4.x to 10.6x, select MC780_ES7480
MFP_MPS4242mc-X4.
•
In the [Name] box, the name that is entered in the
[Address] box is automatically displayed.
•
The way to select the PPD le differs depending on
countries or regions as follows:
-
For North America
Even when you enter the IP address or DNS name
of this equipment in the [Address] box, the correct
PPD le is not selected in the [Print Using] box.
Therefore, select [Other] in the [Print Using] box,
and select the PPD le MC780_ES7480 MFP_
MPS4242mc-X7 from the [/Library/Printers/PPDs/
Contents/Resources/en.lproj] folder.
-
For the UK
When you enter the IP address or DNS name of
this equipment in the [Address] box, the correct
PPD le is automatically selected in the [Print
Using] box. If the correct PPD is not automatically
selected, select [Select a driver to use] and
choose the PPD le displayed in the list
4
Click [Add].
The Installable Options window appears.
5
Set the following options.
•
Model Selection
— Choose this for using your model.
•
Finisher
Not Installed — Select this if a nisher is
not installed.
Inner Finisher (1 Tray) — Select this
when the Inner Finisher is installed.
Note
•
Even if you choose [Not Installed] for the Finisher
during print settings, the nisher such as stapling
can be selected. If you select the nisher for printing
but the nisher is not installed, nisher settings will
be ignored and printing will be performed correctly.
•
Trays
Tray 1
Select this when the tray 1 is installed.
Tray 1 and 2
Select this when the tray 1 and 2 are
installed.
Tray 1, 2 and 3
Select this when the tray 1, 2 and 3 are
installed.
Tray 1, 2, 3 and 4
Select this when the tray 1, 2, 3 and 4 are
installed.
6
Click [OK].
The printer is added to the Printer List.
■ Conguring Bonjour printing
1
Open System Preferences and click
[Print & Scan].
2
Click [+].

Oki MC780 series Specifications

General

Brand	Oki
Model	MC780 series
Category	All in One Printer
Language	English