Oki Microline 182 - MAINTENANCE TOOLS

‘L
2. MAINTENANCE TOOLS
The tools in table 2-l are necessary for replacing printed-circuit boards and unit parts. For other
maintenance procedures, different tools may be necessary.
Table 2-l Maintenance Tools
No. Tool
Quantity Purpose
Remarks
1 Phillips screwdriver
1 2- to 2.6-mm screws
No. l-100
2 Phillips screwdriver
1 3- to 5-mm screws
No. 2-200
3 Screwdriver No. 3-100
1
4 Cutters No. 5H
1
5 Round pliers No. 1
1
6
Thickness gauge set 1 for head gap adjustment
7 Metal rod
1 for head gap. adjustment
a Volt-ohm-milliammeter
1
2-l