Oki Microline 182 User Manual

3.2.11 Printer mechanism
(1)
(2)
(3)
(4)
(5)
6)
(7)
(8)
Remove the upper cover (see 3.2.1).
Remove connector @ connecting the control board @ and transformer assembly@.
Remove ground ‘strap screw 0.
Remove the operation board (see 3.2.5).
Remove four screws @) and washers @.
Rem&e printer mechanism 0.
Remove three screws@, two screws 0, and control board @.
Foi reassembly, reverse the disassembly procedure.
3 - 22

Oki Microline 182 Specifications

General

Brand	Oki
Model	Microline 182
Category	Printer
Language	English