Oki ML620 - Page 66

ML620/ML621 User’s Guide 66
MENU SETTINGS TABLE
Group Item Function Settings (defaults are set in bold italic)
CSF (Cut
Sheet
Feeder) Bin
1 (Appears
only when the
optional Cut
Sheet Feeder is
installed.)
Line Spacing Change to 8 lines per inch (lpi) to
get more lines on a page.
6 LPI, 8 LPI
Page Width
4
(only
displayed for ML621)
Change to 13.6” to print on wide
paper.
8”, 13.6”
Page Length Selects the length of the paper
you are using. This enables the
printer to keep track of the initial
printing position (TOF) on each
page.
3” (76.2 mm), 3.25” (82.6 mm),
3.33” (84.7 mm), 3.5” (88.9 mm),
3.66” (993.1 mm), 4” (101.6 mm),
5” (127 mm), 5.5” (139.7 mm), 6”
(152.4 mm), 7” (177.8 mm), 8”
(203.2 mm), 8.5” (215.9 mm), 11”
(279.4 mm), 11.7” (296.3 mm),
12” (304.8 mm), 14” (355.6 mm),
16” (420.9 mm), 17” (431.8 mm)
Cut Sheet Auto Eject
Position
When the printer reaches the
selected measurement, measured
from the bottom of the page, it
ejects the paper.
.25” (6.35 mm), .5” (12.7 mm), .58”
(14.82 mm), Invalid
TOF Adjust Set an adjustment value for the
reference position in regard to the
TOF position of a cut sheet paper.
The position moves to the bottom
edge of the page (+) and to the
top edge of the page (–) in 1/144”
increments.
–20 ~ –1, 0, +1 ~ +20