Paper handling > 16
3. Ensure the Paper Type Lever (1) is set to Cut Sheet.
4. Sheets smaller than 5.83 x 2.17" (148 x 55 mm)
only: Set the left margin of the paper by adjusting the
Paper Guide (1) along the scale (2) relative to the start of
printed line marker arrow (3).
5. Adjust the Paper Thickness Lever (4) to suit the paper.
See “Setting the Paper Thickness lever” on page 25.
Note
If the Paper Thickness Lever setting does not match
the paper being used, paper feeding and printing may
not work properly.
1
1
2
3
4
To Next Page
Loading...
