Oki ML6300FB - Responding to General Problems

Troubleshooting > 47
Responding to general problems
Use the following table to help you to identify symptoms with
possible causes and take suggested remedial actions.
Problem Cause Action
No power
No power The power cable is
not properly
connected.
Check the power cable
is properly connected
at both power outlet
and printer.
Power outlet
problem or power
outage.
Plug another appliance
into this outlet to
check if it works.
No printing takes place
SEL indicator is
unlit.
The printer driver
is not installed
properly.
Re-install the printer
driver correctly.
The printer has
just stopped
printing.
Press the SEL button.
There is no paper
in the printer.
Load paper.
SEL indicator is
illuminated but no
printing takes
place.
Interface cable is
disconnected.
Reconnect the
interface cable.
Wrong interface
cable has been
used.
Use correct interface
cable.
The print head is
moving but no
printing takes
place.
The ribbon
cartridge has not
been installed.
Install the ribbon
cartridge.