Operating instructions > 41
Note
If the specified correction range is more than +/- 60
in, the QUIET indicator flashes and the paper cannot
be moved.
6.
When the paper is positioned at the required TOF, release
the buttons in Step 5 above.
To save this position as the TOF, press the SEL button to
set the printer off-line and press and hold down the SHIFT
and PARK buttons for 3 seconds.
Note
Do not turn the Platen Knob or switch off the printer
during the above procedure.
Quick printer settings
Printer impact mode
When switched ON, the printer enters the impact mode
selected in the menu. You can change this to normal speed
and quiet printing without using the menus as follows.
Normal speed printing
Use this for standard file printing operations.
1.
Ensure the SEL indicator is illuminated.
2.
Hold down the SHIFT button and press the TEAR button.
The QUIET indicator turns off.
Quiet printing
Use this for quieter printing.
1.
Ensure the SEL indicator is illuminated.
2.
Hold down the SHIFT button and press the TEAR button.
The QUIET indicator is illuminated.
To Next Page
Loading...
Need help?
General
