Paper handling > 17
6. With the printing side upwards, insert the paper on the
Paper Tray (2) into the printer until it is gripped.
Note
Sheets smaller than 5.83 x 2.17" (148 x 55 mm) must
be aligned with the paper guide (1).
Ejecting cut sheet paper
When the printer reaches the end of the cut sheet page it
automatically ejects the page. If required, add another sheet
for the printer to continue printing from where it left off.
To eject a cut sheet left in the printer, carry out the following:
1. Press the SEL button to put the printer off-line.
2. Press the PARK button and the paper is ejected to the
Paper Tray.
Note
Paper longer than A4 length (297 mm) may overlap
and possibly fall off the Paper Tray.
1
2
To Next Page
Loading...
Need help?
General
