Oki ML6300FB - Split Print

Troubleshooting > 52
The printout differs from the screen display (cont.).
Broken and
uneven vertical
lines.
This may happen
in bidirectional
printing.
Use Print Registration
in the adjustment
mode to adjust.
Too large or small
line spacing.
Line spacing is not
selected correctly.
Reselect line spacing
correctly in the
application.
Split print
Blanks appear in
graphic printout.
This is a paper
feed error, which
is especially
notable in printing
regular characters.
This is not a failure.
Blanks or
deformed
characters appear
in double height
type or other
extended types.
This is a paper
feed error due to
line feeding in
printing a single
character.
This is not a failure.
Use the printer's built-
in fonts when you
print important
documents or bills.
Improper cut sheet feed
No paper feed. Sheets are located
off the paper
guide.
Load sheets with their
left edges against the
paper guide.
Sheets are not
loaded to the end.
Load sheets to the
end.
The platen rotates
without paper
feed, or
continuous forms
instead of cut
sheets are fed.
Sheets are not
loaded to the end.
Load sheets to the
end.
The printer is in
the continuous
forms mode.
Eject the continuous
forms and select cut
sheet mode for the
printer.
Problem Cause Action