Oki ML6300FB - Page 53

Troubleshooting > 53
Improper cut sheet feed (cont.)
Paper distortion. Sheets are not
loaded to the end,
or they are not
inserted straight.
Load sheets to the
end.
Paper with
wrinkles, folds or
other defects.
Change paper.
Paper not specified
for the printer.
Use paper types
specified for the
printer.
Unable to eject. The FF/LOAD
button is pressed.
Press the PARK
button.
Improper continuous forms feed
No line feed, and
no paper feed.
Paper is off the Pin
Tractors.
Reload paper
correctly.
The adjust lever
position does not
match the paper
type.
Set the adjust lever to
the correct position.
Problem Cause Action